• Schneider ATV9B0C11T6 Variable speed drive Altivar Process Modular, ATV900, Low Harmonic/Regen drive,ATV9B0C11T6

Schneider ATV9B0C11T6 Variable speed drive Altivar Process Modular, ATV900, Low Harmonic/Regen drive,ATV9B0C11T6, Schneider

Schneider ATV9B0C11T6 Variable speed drive Altivar Process Modular, ATV900, Low Harmonic/Regen drive

Complementary
motor slip compensation
Automatic whatever the load
Not available in permanent magnet motor law
Can be suppressed
Adjustable
acceleration and deceleration ramps
Linear adjustable separately from 0.01...9999 s
protection type
Safe torque off motor
Motor phase break motor
Safe torque off drive
Overheating drive
Short-circuit protection drive
Motor phase break drive
Overspeed drive
Break on the control circuit drive
Overvoltages on the DC bus drive
Overload of output voltage drive
Line supply overvoltage drive
Line supply phase loss drive
Line supply undervoltage drive
Overcurrent between output phases and earth drive
Thermal protection motor
Thermal protection drive
frequency resolution
0.012/50 Hz analog input
0.1 Hz display unit
electrical connection
Removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 control
Screw terminal line side
M10 x 2 bars motor
connector type
2 RJ45 for Ethernet IP/Modbus TCP on terminal
1 RJ45 for Modbus serial on terminal
physical interface
2-wire RS 485 for Modbus serial
transmission frame
RTU for Modbus serial
transmission rate
10/100 Mbit/s for Ethernet IP/Modbus TCP
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
data format
8 bits, configurable odd, even or no parity for Modbus serial
type of polarization
No impedance for Modbus serial
number of addresses
For Modbus serial
method of access
Slave for Modbus TCP
analogue input type
Software-configurable voltage AI1, AI3 0...10 V DC 30 kOhm 12 bits
Software-configurable current AI1, AI3 0...20 mA/4...20 mA 250 Ohm 12 bits
Software-configurable voltage AI2 +/- 10 V DC 30 kOhm 12 bits
Software-configurable voltage AI2 0...10 V DC 30 kOhm 12 bits

Environment
THDI
<= 5 % full load conforming to IEEE 519
electromagnetic compatibility
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
pollution degree
2 EN/IEC 61800-5-1
vibration resistance
1.5 mm peak to peak 2...13 Hz IEC 60068-2-6
0.5 gn 13...200 Hz IEC 60068-2-6
shock resistance
4 gn 11 ms IEC 60068-2-27
relative humidity
5...95 % without condensation conforming to IEC 60068-2-3
ambient air temperature for operation
40...50 °C with derating factor
-5...40 °C without
ambient air temperature for storage
-40...70 °C
operating altitude
<= 2000 m with current derating above 1000m
environmental characteristic
Chemical pollution resistance class 3C3 EN/IEC 60721-3-3
Dust pollution resistance class 3S3 EN/IEC 60721-3-3
standards
EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
UL 61800-5-1
product certifications
REACH
UL
TÜV
CUL
marking
CE

Write a review

Please login or register to review

Schneider ATV9B0C11T6 Variable speed drive Altivar Process Modular, ATV900, Low Harmonic/Regen drive,ATV9B0C11T6

  • Brand: Schneider
  • Product Code: ATV9B0C11T6
  • Availability: 1000

Tags: ATV9B0C11T6