• Panasonic MINAS A5 MBDHT2110N21 Servo Driver,MBDHT2110N21

Panasonic MINAS A5 MBDHT2110N21 Servo Driver,MBDHT2110N21, Panasonic

Panasonic MINAS A5 Family MBDHT2110N21 Servo Driver

Spec Detail

ItemSpecifications
Part NumberMBDHT2110N21
DetailsA5ⅡN series
RTEX, Ultra high-speed Network
with the safety function
Family NameMINAS A5
SeriesA5ⅡN series
TypeRTEX, Ultra high-speed Network
FrameB-Frame
Frequency response2.3 kHz
Control methodPosition control, Velocity control, Torque control, and Full-closed control
Safety Functionwith
Power device Max. current rating15A
Current detector current rating10A
Supply voltageSingle phase 100 V
I/F Classification of typeRTEX
Dimensions (W) (Unit: mm)55
Dimensions (H) (Unit: mm)150
Dimensions (D) (Unit: mm)132
Mass (kg)1.0
EnvironmentFor more details, please refer to the instruction manual.


Basic Specifications

ItemSpecifications
Input power: Main circuitSingle phase 100 to 120V +10% -15% 50/60 Hz
Input power: Control circuitSingle phase 100 to 120V +10% -15% 50/60 Hz
Encoder feedback17-bit (131072 resolution) absolute encoder, 7-wire serial
20-bit (1048576 resolution) incremental encoder, 5-wire serial
External scale feedbackA/B phase, homing signal differential input. Serial communication is also supported.
Parallel I/O connector:
Control signal Input
Each 8 input can be assigned by the parameter.
Parallel I/O connector:
Control signal Output
Each 3 input can be assigned by the parameter.
Parallel I/O connector:
Analog signal Output
2 outputs (Analog monitor: 1, 2 output)
Parallel I/O connector:
Pulse signal Output
Line driver output for Encoder pulses or external scale pulses (A/B phase signal).
Communication functionRTEX, USB
Communication function: USBUSB interface to connect to computers for parameter setting or status monitoring.
Communication function: RTEXCommunication for transmission of a real-time operation command, the parameter setting, or the status monitoring.
RegenerationNo built-in regenerative resistor (external resistor only)
Control mode1. Semi-closed control
Position control: Profile position control [PP], Cyclic position control [CP]
Velocity control: Cyclic velocity control [CV]
Torque control: Cyclic torque control [CT]

2.Full-closed control
Position control: Profile position control [PP], Cyclic position control [CP]
* Switch two modes (above-mentioned 1 and 2) according to the parameter.
* Switch PP/CP/CV/CT mode according to the RTEX communication command.

Write a review

Please login or register to review

Panasonic MINAS A5 MBDHT2110N21 Servo Driver,MBDHT2110N21

  • Brand: Panasonic
  • Product Code: MBDHT2110N21
  • Availability: 1000

Tags: MBDHT2110N21