• Schneider LXM32MD30M2 Motion servo drive,LXM32MD30M2

Schneider LXM32MD30M2 Motion servo drive,LXM32MD30M2, Schneider

Schneider LXM32MD30M2 Motion servo drive - Lexium 32- single phase supply voltage 115/230V - 0.8/1.6kW

Main
range of product
Lexium 32
product or component type
Motion servo drive
device short name
LXM32M
format of the drive
Book
network number of phases
Single phase
[Us] rated supply voltage
100...120 V (- 15...10 %)
200...240 V (- 15...10 %)
supply voltage limits
85...132 V
170...264 V
supply frequency
50/60 Hz (- 5...5 %)
network frequency
47.5...63 Hz
EMC filter
Integrated
continuous output current
10 A (f = 8 kHz)
output current 3s peak
15 A at 115 V for 5 s
maximum continuous power
800 W at 115 V
5600 W at 400 V
nominal power
0.8 kW at 115 V (f = 8 kHz)
3 kW at 400 V (f = 8 kHz)
line current
12.9 A, THDI of 135 % at 115 V, without line choke
11.6 A, THDI of 74 % at 380 V, with external line choke of 1 mH
9.6 A, THDI of 85 % at 480 V, with external line choke of 1 mH
9.8 A, THDI of 146 % at 380 V, without line choke
Complementary
switching frequency
8 kHz
overvoltage category
III
leakage current
<= 30 mA
output voltage
<= power supply voltage
electrical isolation
Between power and control
type of cable
Single-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR
electrical connection
Terminal cable 3 mm² AWG 12 (CN8)
Terminal cable 5 mm² AWG 10 (CN1)
Terminal cable 5 mm² AWG 10 (CN10)
tightening torque
0.5 N.m (CN8)
0.7 N.m (CN1)
0.7 N.m (CN10)
discrete input number
2 capture
2 safety
4 logic
discrete input type
Capture (CAP)
Logic (DI)
Safety (compliment of STO_A, compliment of STO_B)
sampling duration
0.25 ms
0.25 ms (DI) for discrete
discrete input voltage
24 V DC for capture
24 V DC for logic
24 V DC for safety
discrete input logic
Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1
Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
response time
<= 5 ms (compliment of STO_A, compliment of STO_B)
discrete output number
3
discrete output type
Logic (DO) 24 V DC
discrete output voltage
<= 30 V DC
discrete output logic
Positive or negative (DO) conforming to EN/IEC 61131-2
contact bounce time
<= 1 ms (compliment of STO_A, compliment of STO_B)
2 µs (CAP)
0.25 µs...1.5 ms (DI)
braking current
50 mA
response time on output
250 µs (DO) discrete
control signal type
Pulse train output (PTO) RS422 <= 500 kHz <= 100 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <= 10 kHz <= 1 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <= 200 kHz <= 10 m
Pulse/direction (P/D), A/B, CW/CCW RS422 <= 1000 kHz <= 100 m
Servo motor encoder feedback
protection type
Against reverse polarity :inputs signal
Against short-circuits :outputs signal
safety function
STO (safe torque off), integrated
SS1 (safe stop 1), with separated eSM safety card
SS2 (safe stop 2), with separated eSM safety card
SLS (safe limited speed), with separated eSM safety card
SOS (safe operating stop), with separated eSM safety card
safety level
SIL 3 conforming to EN/IEC 61508
PL = e conforming to ISO 13849-1
communication interface
Integrated Modbus
With separated communication card CANopen
With separated communication card CANmotion
With separated communication card Ethernet/IP
With separated communication card EtherCAT
With separated communication card Profibus
With separated communication card DeviceNet
With separated communication card I/O
connector type
RJ45 (labelled CN7) :Modbus
commissioning port
2-wire RS485 multidrop Modbus
transmission rate
9600, 19200, 38400 bps for bus length of 40 m Modbus
number of addresses
Modbus
status LED
1 LED (red) servo drive voltage
signalling function
Display of faults in 7 segments
marking
CE
operating position
Vertical +/- 10 degree
product compatibility
Servo motor BMH (70 mm, 2 motor stacks)
Servo motor BMH (140 mm, 1 motor stacks)
Servo motor BSH (100 mm, 3 motor stacks)
Servo motor BSH (140 mm, 1 motor stacks)
Servo motor BSH (100 mm, 4 motor stacks)
width
68 mm
height
270 mm
depth
237 mm
product weight
2.1 kg

Environment
electromagnetic compatibility
Conducted EMC at class A group 1 conforming to EN 55011
Conducted EMC at class A group 2 conforming to EN 55011
Conducted EMC at environment 2 category C3 conforming to EN/IEC 61800-3
Conducted EMC at category C2 conforming to EN/IEC 61800-3
Conducted EMC at environments 1 and 2 conforming to EN/IEC 61800-3
Electrostatic discharge immunity test at level 3 conforming to EN/IEC 61000-4-2
Susceptibility to electromagnetic fields at level 3 conforming to EN/IEC 61000-4-3
1.2/50 µs shock waves immunity test at level 3 conforming to EN/IEC 61000-4-5
Electrical fast transient/burst immunity test at level 4 conforming to EN/IEC 61000-4-4
Radiated EMC at class A group 2 conforming to EN 55011
Radiated EMC at category C3 conforming to EN/IEC 61800-3
standards
EN/IEC 61800-3
EN/IEC 61800-5-1
product certifications
RoHS
TÜV
UL
CSA
IP degree of protection
IP20 conforming to EN/IEC 60529
IP20 conforming to EN/IEC 61800-5-1
vibration resistance
1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60028-2-27
pollution degree
2 conforming to EN/IEC 61800-5-1
environmental characteristic
Classes 3C1 conforming to IEC 60721-3-3
relative humidity
Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
ambient air temperature for operation
0...50 °C conforming to UL
ambient air temperature for storage
-25...70 °C
type of cooling
Integrated fan
operating altitude
<= 1000 m without derating
> 1000...3000 m with conditions

Write a review

Please login or register to review

Schneider LXM32MD30M2 Motion servo drive,LXM32MD30M2

  • Brand: Schneider
  • Product Code: LXM32MD30M2
  • Availability: 1000

Tags: LXM32MD30M2