Panasonic MINAS A5 MFDHTA464ND1 Servo Driver,MFDHTA464ND1, Panasonic
Panasonic MINAS A5 Family MFDHTA464ND1 Servo Driver
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MFDHTA464ND1 |
| Details | A5ⅡN series RTEX, Ultra high-speed Network without the safety function |
| Family Name | MINAS A5 |
| Series | A5ⅡN series |
| Type | RTEX, Ultra high-speed Network |
| Frame | F-Frame |
| Frequency response | 2.3 kHz |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | without |
| Power device Max. current rating | 100A |
| Current detector current rating | 64A |
| Supply voltage | 3-phase 400 V |
| I/F Classification of type | RTEX |
| Dimensions (W) (Unit: mm) | 130 |
| Dimensions (H) (Unit: mm) | 220 |
| Dimensions (D) (Unit: mm) | 214 |
| Mass (kg) | 4.7 |
| Environment | For more details, please refer to the instruction manual. |
Basic Specifications
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single phase 380 to 480V +10% -15% 50/60 Hz |
| Input power: Control circuit | DC 24V ± 15% |
| Encoder feedback | 17-bit (131072 resolution) absolute encoder, 7-wire serial 20-bit (1048576 resolution) incremental encoder, 5-wire serial |
| External scale feedback | A/B phase, homing signal differential input. Serial communication is also supported. |
| Parallel I/O connector: Control signal Input | Each 8 input can be assigned by the parameter. |
| Parallel I/O connector: Control signal Output | Each 3 input can be assigned by the parameter. |
| Parallel I/O connector: Analog signal Output | 2 outputs (Analog monitor: 1, 2 output) |
| Parallel I/O connector: Pulse signal Output | Line driver output for Encoder pulses or external scale pulses (A/B phase signal). |
| Communication function | RTEX, USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RTEX | Communication for transmission of a real-time operation command, the parameter setting, or the status monitoring. |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
| Control mode | 1. Semi-closed control Position control: Profile position control [PP], Cyclic position control [CP] Velocity control: Cyclic velocity control [CV] Torque control: Cyclic torque control [CT] 2.Full-closed control Position control: Profile position control [PP], Cyclic position control [CP] * Switch two modes (above-mentioned 1 and 2) according to the parameter. * Switch PP/CP/CV/CT mode according to the RTEX communication command. |
Panasonic MINAS A5 MFDHTA464ND1 Servo Driver,MFDHTA464ND1
- Brand: Panasonic
- Product Code: MFDHTA464ND1
- Availability: 1000
Tags: MFDHTA464ND1