• Schneider ATV930D11N4Z Variable speed drive ATV930 - cabinet Integration - IP20 - 11KW - 380...480V,ATV930D11N4Z

Schneider ATV930D11N4Z Variable speed drive ATV930 - cabinet Integration - IP20 - 11KW - 380...480V,ATV930D11N4Z, Schneider

Schneider ATV930D11N4Z Variable speed drive ATV930 - cabinet Integration - IP20 - 11KW - 380...480V

Main
range of product
Altivar Process ATV900
product or component type
Variable speed drive
device application
Industrial application
device short name
ATV930
variant
With braking chopper
Standard version
product destination
Synchronous motors
Asynchronous motors
mounting mode
Wall mount
EMC filter
Integrated conforming to EN/IEC 61800-3 category C2 with <= 10 m motor cable maxi
IP degree of protection
IP20 conforming to IEC 61800-5-1
type of cooling
Forced convection
supply frequency
50...60 Hz (+/- 5 %)
network number of phases
3 phases
[Us] rated supply voltage
380...480 V (- 15...10 %)
motor power kW
11 kW (normal duty)
motor power hp
15 hp (normal duty)
line current
19.8 A at 380 V (normal duty)
prospective line Isc
50 kA
apparent power
14.1 kVA at 480 V (normal duty)
continuous output current
23.5 A at 4 kHz (normal duty)
maximum transient current
28.2 A during 60 s (normal duty)
asynchronous motor control profile
Constant torque standard
Variable torque standard
Optimized torque mode
synchronous motor control profile
Permanent magnet motor
Synchronous reluctance motor
speed drive output frequency
0.1...599 Hz
nominal switching frequency
4 kHz
switching frequency
2...16 kHz adjustable
safety function
STO (safe torque off) SIL 3
number of preset speeds
16 preset speeds
communication port protocol
Modbus serial
Ethernet/IP
Modbus TCP
option module
Slot A : communication module for Profibus DP V1
Complementary
output voltage
<= power supply voltage
motor slip compensation
Can be suppressed
Not available in permanent magnet motor law
Automatic whatever the load
Adjustable
acceleration and deceleration ramps
Linear adjustable separately from 0.01...9999 s
braking to standstill
By DC injection
protection type
Motor : thermal protection
frequency resolution
Display unit : 0.1 Hz
electrical connection
Control, screw terminal : 0.5...1.5 mm² (AWG 20...AWG 16)
connector type
2 RJ45 (on the control block) for Ethernet IP/Modbus TCP
physical interface
2-wire RS 485 for Modbus serial
transmission frame
RTU for Modbus serial
transmission rate
10/100 Mbit/s for Ethernet IP/Modbus TCP
exchange mode
Half duplex, full duplex, autonegotiation for Ethernet IP/Modbus TCP
data format
8 bits, configurable odd, even or no parity for Modbus serial
type of polarization
No impedance for Modbus serial
method of access
Slave for Modbus TCP
supply
External supply for digital inputs : 24 V DC (19...30 V) current <= 1.25 mA (overload and short-circuit protection)
local signalling
3 mono/dual colour LED for local diagnostic
width
155 mm
height
345 mm
depth
225 mm
product weight
6.9 kg
analogue input number
3
analogue input type
Software-configurable voltage AI1, AI2, AI3 : 0...10 V DC impedance 30 kOhm, resolution 12 bits
discrete input number
10
discrete input type
Programmable DI1...DI8 : 24 V DC (<= 30 V) impedance 3.5 kOhm
input compatibility
Discrete input DI1...DI8 : level 1 PLC conforming to EN/IEC 61131-2
analogue output number
2
discrete output number
2
discrete output type
Logic output DQ+ : 0...1 kHz (<= 30 V) DC, 100 mA
sampling duration
Discrete input DI1...DI8 : 2 ms (+/- 0.5 ms)
accuracy
Analog input AI1, AI2, AI3 : +/- 0.6 % for a temperature variation 60 °C
Analog output AQ1, AQ2 : +/- 1 % for a temperature variation 60 °C
linearity error
Analog input AI1, AI2, AI3 : +/- 0.15 % of maximum value
maximum switching current
Relay output R1 on resistive load (cos phi = 1) : 3 A at 250 V AC
relay output number
3
relay output type
Configurable relay logic R1 : fault relay NO/NC electrical durability 100000 cycles
refresh time
Relay output R1, R2, R3 : 5 ms (+/- 0.5 ms)
minimum switching current
Relay output R1, R2, R3 : 5 mA at 24 V DC
isolation
Between power and control terminals
specific application
Process
IP degree of protection
IP21
motor starter type
Variable speed drive

Environment
insulation resistance
> 1 mOhm at 500 V DC for 1 minute to earth
noise level
56 dB conforming to 86/188/EEC
power dissipation in W
51 W (natural convection) at 380 V switching frequency 4 kHz
vibration resistance
1.5 mm peak to peak (f = 2...13 Hz) conforming to IEC 60068-2-6
shock resistance
15 gn during 11 ms conforming to IEC 60068-2-27
volume of cooling air
103 m3/h
operating position
Vertical +/- 10 degree
THDI
<= 48 % from 80...100 % of load conforming to IEC 61000-3-12
electromagnetic compatibility
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
pollution degree
2 EN/IEC 61800-5-1
environmental characteristic
Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
relative humidity
5...95 % without condensation conforming to IEC 60068-2-3
ambient air temperature for operation
50...60 °C with derating factor
ambient air temperature for storage
-40...70 °C
operating altitude
1000...4800 m with current derating 1 % per 100 m
standards
UL 508C
product certifications
UL
CSA
TÜV
REACH
marking
CE

Write a review

Please login or register to review

Schneider ATV930D11N4Z Variable speed drive ATV930 - cabinet Integration - IP20 - 11KW - 380...480V,ATV930D11N4Z

  • Brand: Schneider
  • Product Code: ATV930D11N4Z
  • Availability: 1000

Tags: ATV930D11N4Z