Delta DVP10RC-E2 Resolver Connection Module, 12-bit,DVP10RC-E2, Delta

Delta DVP10RC-E2 Resolver Connection Module, 12-bit

Delta Standard Sequential Control MPU / Integrated Analog I/O MPU DVP-ES2/EX2 Series

FEATURES

ES2 series is a small PLC for basic sequential control. It is economical, highly efficient and functional.

SPECIFICATIONS

MPU points: 16 / 20 / 24 / 32 / 40 / 60
Program capacity: 16k steps
Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta’s AC motor drives
Password protection: Password for subroutine, user ID, restriction on trial times
Highly efficient instruction efficient instruction execution

APPLICATIONS

HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system

RS-485 Interface Adapter (DB9 - RJ12)

DVPAETB-ID32A Terminal Block (32 VDC 24VDC Input)

DVPAETB-OR16A Terminal block (16 relay outputs, 2A per output)

DVPPCC01 General Purpose Memory Card

TAP-CN01 DeviceNet / CANopen interface splitter. 3 connectors.

TAP-CN02 DeviceNet / CANopen interface splitter. 5 connectors.

TAP-CN03 DeviceNet / CANopen interface splitter. 5 connectors (of which 3 RJ).

TAP-CP01 Power Supply Unit power to the network DeviceNet

TAP-TR01 Terminal 120 Ohm Resistor for CANopen

DVPACAB115 Cable download program, HPP <=> PLC, 1.5m

DVPACAB215 Program Download Cable, PC (TP02G / TP04G) <=> PLC, 1.5m, 8PIN ------ 9PIN / 25PIN

DVPACAB2A30 Program Download Cable, PC (TP02G / TP04G) <=> PLC, 3.0m, 8PIN ------ 9PIN

DVPACAB315 Download Cable, HPP <=> PC, 1.5m

DVPACAB403 I / O signal extension cable: between the base unit and the expansion module, or between two expansion modules, 30cm

DVPACAB7A10 DVP32SM11N Communication Cable with ETB-ID32, 1m

DVPACAB7B10 DVP32SN11TN Communication Cable with ETB-OR16, 1m

TAP-CB03 CANopen communication cable, length 0.3 m

TAP-CB04 CANopen communication cable, 1 m long. OLD TAP-CB10 designation

TAP-CB05 CANopen communication cable, length 0.5 m

TAP-CB100 CANopen communication cable, length 10 m.

UB-10-ID32A Terminal Module for DVP32SM11N (analog DVPAETB-ID32A)

UC-CMC003-01A CANopen communication cable, length 0.3m (analogue TAP-CB03)

UC-CMC005-01A CANopen communication cable, length 0.5m (analogue TAP-CB05)

UC-CMC010-01A CANopen communication cable, length 1m (analogue TAP-CB10)

UC-CMC020-01A CANopen communication cable, length 2m (analogue TAP-CB20)

UC-CMC030-01A CANopen communication cable, length 3m (analogue TAP-CB30)

UC-ET010-24A 1 m cable with IDC 40p - 40p connectors for connecting DVP32SM11N and DVPAETB-ID32A (analog DVPACAB7A10)

UC-ET010-24B Shielded cable 1 m with IDC 40p - 40p connectors for connecting DVP32SM11N and DVPAETB-ID32A (analog DVPACAB7A10S)

UC-ET010-24C 1 m cable with IDC 40p - 2x20p connectors for connecting DVP32SN11TN and 2 DVPAETB-OR16A (analog DVPACAB7B10)

UC-ET010-24D Shielded cable 1 m with IDC 40p - 2x20p connectors for connecting DVP32SN11TN and 2 DVPAETB-OR16A (analog DVPACAB7B10S)

UC-ET020-24B Shielded 2 m cable with IDC 40p - 40p connectors for connecting DVP32SM11N and DVPAETB-ID32A (analog DVPACAB7A20S)

UC-ET020-24D Shielded 2 m cable with IDC 40p - 2x20p connectors for connecting DVP32SN11TN and 2 DVPAETB-OR16A (analog DVPACAB7B20S)

UC-ET030-24B Shielded 3 m cable with IDC 40p - 40p connectors for connecting DVP32SM11N and DVPAETB-ID32A (analog DVPACAB7A30S)

UC-ET030-24D Shielded 3 m cable with IDC 40p - 2x20p connectors for connecting DVP32SN11TN and 2 DVPAETB-OR16A (analog DVPACAB7B30S)

UC-MS010-02A DVP PLC communication cable with HMI / PC (RS-232 socket DB-9 -> mini-DIN), 1m (analog DVPACAB2B10)

UC-MS020-01A DVP PLC communication cable with HMI / PC (RS-232 socket DB-9 -> mini-DIN), 2m (analog DVPACAB2A20)

UC-MS020-06A DVP PLC communication cable with HMI / PC (RS-232 DB-9 plug -> mini-DIN), 2m (analog DOPACAB2A20L)

UC-MS030-01A DVP PLC communication cable with HMI / PC (RS-232 socket DB-9 -> mini-DIN), 3m (analog DVPACAB2A30)

UC-MS030-03A TP communication cable with AH500 (RS-232 DB-9 plug -> DB-9 socket), 3m

UC-MS030-06A DVP PLC communication cable with HMI (RS-232 DB-9 plug -> mini-DIN), 3m (analog DOPACAB2A30L)